CR-1 Glass Coating uses 100% inorganic glass.
The high-hardness glass coating is not destroyed by UV rays and will not deteriorate over time, so it will last almost forever.
To prevent brake dust from sticking,
it maintains a deep shine.
Hardness 3.2Gpa,9H |
|
| The coating hardness is verified by nanoindentation and pencil hardness tests. |
| |
|
100% genuine glass coating |
|
| It has high density and adhesion, and forms a coating regardless of the material of the surface to be painted. |
| |
|
Semi-permanent coating |
|
| There is no deterioration due to natural environments such as rain and UV rays, or the use of parts cleaners, chain cleaners, etc. |
| |
|
Heat resistant up to 1300℃ |
|
| The coating will not peel off due to temperature changes or heat. |
| |
|
*This does not increase the strength or corrosion resistance of the wheel body.
*This coating may be damaged or deteriorated by flying stones, dirt, or the use of chemicals.
In addition, corrosion of the wheel surface caused by deterioration of this coating is not covered by the one-year free quality guarantee for the wheel body.
