VRC/RM MASTERCYLINDER
LINE UP
Exhaustive pursuit of Radial mastercylinder function
MASTER CYLINDER FIT CALCULATION
< MASTERCYLINDER MORE >
It satisfy every riders by the processing technology of aluminum and has achieved steller performance in world wide races.
Radial-pump
Push rod and mastercylinder are lined and placed vertically, which gives you more direct brake feeling and fine braking.
Power lever blade
Selectable length power lever
It achieves better grip control with less gripping power.
*Clutch mastercylinders adopt the straight lever blade
Safety function
Quick exchange is available by loosing just one bolt. The lever blade is folded for less damage on the mastercylinder.
Safety function
STANDERD
REAR-VIEW MIRROR
（M10×P1.25）
RESERVOIR MOUNT
（M6×1.0）
The high spec mastercylinder
◇ Forged mastercylinder body
◇ Folding lever blade
◇ Quick release handlebar clamp
◇ Power lever blade
◇ Radial-pump
◇ Variable ratio control
■Lever blade length: Standard/ Short
■Cylinder size×Lever ratio：φ19×20-18mm/φ19×18-16mm(brake only）/φ17.5×18-16mm/φ16×18-16mm/φ14×18-16mm
■1"(25.4mm)Handle mastercylinder：φ19×18-16mm(Rear-view mirror clamp (CW)/Straight lever blade）
LINE UP
＜ What variable ratio control ? ＞
Gale Speed original lever ratio control can adjust the lever ratio (from Point of Support to Point of Load) in 0.25mm per step, total 2mm at maximum. The lever ratio become lager to A, the lever push feeling will be hard. The lever ratio bome smaller to B, the lever push feeling will be soft.
-
-
※φ19x18-16mm
-
TYPE VRC19-17B/17-17B/16-17B/14-17B Point of Support - Point of Effort Point of Support - Point of Load Lever ratio 140 16 8.75 16.25 8.62 16.5 8.48 16.75 8.36 17 8.24 17.25 8.12
-
TYPE VRC19-19B Point of Support - Point of Effort Point of Support - Point of Load Lever ratio 140 18 7.78 18.25 7.67 18.5 7.57 18.75 7.47 19 7.37 19.25 7.27 19.5 7.18 19.75 7.09 20 7.00
The high spec mastercylinder
◇ Forged mastercylinder body
◇ Folding lever blade
◇ Quick release handlebar clamp
◇ Power lever blade
◇ Radial-pump
■Lever blade length: Standard/ Short
■Cylinder size×Lever ratio：φ19×19mm/φ19×17mm(brake only）/φ17.5×17mm/φ16×17mm/φ14×17mm
■1"(25.4mm)Handle mastercylinder：φ19×17mm(Rear-view mirror clamp (CW)/Straight lever blade）
LINE UP
