CR-1 glass coating
CR-1 glass coating that specifies 100% inorganic glass.
The high-hardness glass coating that isn't destroyed by UV rays doesn't deteriorate over time and remains semi-permanent
It keeps a glow to prevent the dirt of the brake dust from sticking.
※Available an option only at the time of new purchase / repaint service
Will be more short time of wash
A glass coating is formed on the outermost surface of the paint and base material to prevent dirt from sticking
Membrane pressure 0.1μm
Thin coating pressure per area is strong against expansion and contraction and vibration, and prevents cracking and peeling
Hardness 3.2Gpa,9H
Prove coating hardness with nano-indentation and pencil hardness test
100% real glass coating
It has high density and adhesion, and forms a coating regardless of the material of the painted surface.
Semi-permanent film
There isn't deterioration due to the use of natural environment such as rain or ultraviolet rays, parts cleaner, chain cleaner, etc
Heat resistant temperature 1300℃
The coating doesn't peel off due to temperature changes or heat.
*It doesn't enhance the strength or corrosion resistance of the wheel body.
*This coating may be damaged or deteriorated by flying stones, dirt, or the use of chemicals. Also, the corrosion of the wheel surface due to the deterioration of this coating will not occur for one year of the wheel body.
Compensation and quality assurance are not covered.
ORDER ⇒ CONTACT US